¶ MaxmakeLab HiMill D1/D1S Connection
¶ 1. Automatic Connection
Connect the computer and device with a data cable. When opening the software for the first time, it can automatically search for and connect to HiMill devices.
📋 Connection Tips:
- Ensure stable data cable connection
- Device is properly powered on
- First connection recommended to use automatic search function
¶ 2. Manual Connection
Connect the computer and device with a data cable, manually select device and connect. Can automatically search or manually select serial port.
When automatic search fails, try using serial port connection.
⚠️ Connection Precautions:
- When automatic search fails, try manually selecting serial port
- Ensure the selected serial port corresponds to the device
- Confirm device is properly powered on before connection
¶ 3. WiFi Connection
Connect to device via WiFi, need to connect to device hotspot, or configure network for device, connect in LAN (support pending firmware update).
🔄 Function Status:
- WiFi connection function is under development
- WiFi connection will be supported in future firmware updates