This page provides handling methods and solutions for HiMill D1/D1s equipment when encountering tool breakage during processing.
Attention:
- After tool breakage, stop the equipment operation immediately and remove the broken tool shank
- After power off, origin information will be retained, but tool compensation information will be reset to zero
| No. | Code Form | Equipment Status | Operation |
|---|---|---|---|
| 1 | Only one tool processing, no tool change code Example: M3 S13000 (Processing) M5 M30 |
Power Off | Restart equipment, after homing, pull down the handle and directly replace the tool, reset Z0, and start processing. |
| Power On | After homing, replace the tool, pull down the handle and directly replace the tool, reset Z0, and start processing. | ||
| 2 | Only one tool processing, but with tool change code T1M6 Example: M5 T1 M6 M3 S13000 (Processing) M5 M30 |
Power Off | Restart equipment, after homing, click the tool change button in software, replace tool and auto-measure height, reset Z0, then start processing |
| Power On | After homing, click the tool change button in software, replace tool and auto-measure height, can start processing directly | ||
| 3 | Multiple tools processing, and first tool breaks Example: M5 T1 M6 (Processing) T2 M6 (Processing) T3 M6 (Processing) M5 M30 |
Power Off | Restart equipment, after homing, click the tool change button in software, replace tool and auto-measure height, reset Z0, then start processing |
| Power On | After homing, click the tool change button in software, replace tool and auto-measure height, can start processing directly | ||
| 4 | Multiple tools processing, and tool X breaks during processing Example: M5 T1 M6 (Processing) T2 M6 (Processing) TX M6 (Processing) T8 M6 (Processing) M5 M30 |
Power Off | Open NC file with computer, delete all code before TXM6 (keep TXM6 and all subsequent code) After homing, import modified code, click tool change button in software, replace tool and auto-measure height, reset Z0, then start processing |
| Power On | Open NC file with computer, delete all code before TXM6 (keep TXM6 and all subsequent code) After homing, import modified code, click tool change button in software, replace tool and auto-measure height, can start processing directly |