¶ MaxmakeLab Software Installation
¶ 📖 Software Introduction
MaxmakeLab is an intelligent control software designed specifically for HiMill series CNC equipment, providing an intuitive operation interface and rich processing functions to help users easily complete various creative processing tasks.
¶ 🖥️ System Requirements
¶ Windows System
- Operating System: Windows 10/11 (64-bit) or higher
- Processor: Intel i3 or equivalent performance CPU (non-ARM architecture)
- Memory: 4GB or more
- Storage Space: 1GB or more available space
- Display: Resolution 1920x1080 or higher
- USB Port: USB 2.0 or higher version
¶ macOS System
- Operating System: macOS 14 (Sonoma) or higher
- Processor: Apple Silicon
- Memory: 4GB or more
- Storage Space: 1GB or more available space
- Display: Resolution 1920x1080 or higher
- USB Port: USB 2.0 or higher version
¶ 📥 Software Download
You can download the latest version of MaxmakeLab software through the following link. Choose the appropriate version according to your operating system:
MaxmakeLab Software Download Link
Recommendation: Please always download the latest version of the software for the best functional experience and stability.
¶ 🎬 Installation and Usage Process
¶ Windows System Installation and Usage Steps
¶ 1. Double-click the installer to install the software
¶ 2. Open the software
¶ 3. Click auto-connect to find device, and click return to zero after connection
¶ 4. You can also select device and manually select serial port to connect
¶ ⚠️ Important Notes
🔍 Device Connection Issues:
When device cannot be found:
- Try restarting the software
- Try unplugging and re-plugging the USB data cable
- Check if the device is properly powered on
- Ensure the correct driver is installed
⚡ Electrical Safety:
- Ensure USB data cable connection is firm
- Avoid disconnecting during data transmission
- Check if USB port is working normally
🛡️ System Compatibility:
- Confirm operating system version meets requirements
- Run software as administrator (if required)
- Close potentially conflicting software of the same type
🔧 Troubleshooting:
- Restart software and equipment, then retry
- Check driver status in Device Manager
- Try different USB ports
¶ ❓ Frequently Asked Questions
¶ Windows System Issues
¶ Q: What should I do if an error occurs during installation?
A: Please ensure your computer meets system requirements, close other potentially conflicting software, re-download the installer and try installation again.
¶ Q: The software doesn't respond after startup?
A: Check if your computer has the latest graphics driver installed, try running the software as administrator.
¶ macOS System Issues
¶ Q: macOS system shows "Cannot be opened because it is from an unidentified developer"?
A: Hold the Control key and click the application icon, select "Open", then click "Open" again in the popup dialog.
¶ Q: Device cannot be recognized under macOS system?
A:
- Ensure the latest version of macOS is installed
- Check if USB data cable connection is stable, try changing USB port
- Open "System Preferences" → "Security & Privacy" → "General", confirm MaxmakeLab's USB access permission is authorized
- Try restarting software and equipment
¶ Common Issues
¶ Q: Device connects successfully but cannot be controlled?
A: Check if USB data cable is intact, try replacing the data cable or USB port, ensure device is properly powered on.
¶ Q: Software interface displays abnormally?
A: Check if your computer has the latest graphics driver installed, or adjust display resolution to recommended value.